Sword and Shield  8 Generation  Pokemon  Scorbunny Clay art : Making Story

Sword and Shield 8 Generation Pokemon Scorbunny Clay art : Making Story


Hello Clay Cacao. Today, I’ll tell you about
when using white clay and
other ways to make your ear. First of all, this is common to all work. Clay a little
Remove it and remove the dust from your hands. Because I used white clay for this work. So this time, Please remove the dust. because there are many dirt that is not visible on the floor. There are quite a lot of dust. Next, I’ll explain more about making faces.
Because it is a clay containing air. As much as possible, you need to remove the air from the clay.
Otherwise, when you made it There is air on the surface
It gets bumpy. careful handling… For such a smooth face, please arrange it like this. You need to do this. I put the clay in the zipper pack like this.
It is easy to dry. In the video, I made the ears around the belt and embossed
A little sticking out? But if you do not like this part, you should see it from now on. I saw a little light orange popping out.
There’s another way. I think it’s a simpler way to introduce you. White clay Please prepare. carefully removing the air. Prepare an orange.
Please press as much as your ear thickness. Please press. Make sure the thickness is the same and the orange is a little thick. Now the middle of the light orange band.
It makes thin and flat. ok In this way,
You have to cut it. Cut this way.
Cut the white too. Then I’ll put in a light orange in the middle. please put a light orange clay in the middle. In this way, You have to take a good look at the back. Put it like this.
Press it once more to attach better. Then you have to check the back.
Please stretch a little rugged parts. Next time you have to dry it before cutting.
If it does not dry, the clay has the property to stretch. Please dry it. Then you can cut it
It cuts cleanly. It was not well dried. I cut the other side. It’s clean. Now, cut it with a knife, and then the bottom part is like this. It’s so smooth. Right? Are you smooth? I made the ears around the belt and embossed
A little sticking out? But it’s not.. If you like this method, You can complete it in a way you like.
If you have any questions or comments, please leave a comment. ByeBye~!

7 thoughts on “Sword and Shield 8 Generation Pokemon Scorbunny Clay art : Making Story

Leave a Reply

Your email address will not be published. Required fields are marked *