Origami – How To Make An Origami Lion

Origami – How To Make An Origami Lion

Origami How To Origami Lion Dimensions: 21x21cm or 8x8inch Step 1: Make a diagonal fold Step 2: Make another diagonal fold on other side Step 3: Fold both upper edges along center line Step 4: Inside reverse fold each side Step 5: Fold right and left flaps to the center line Step 6: Use an inside reverse fold for side flapses Step 7: Pull right and left flaps so you can flatten the centre square Step 8: Fold lower sides of the square along the center line Step 9: Fold both flaps and turn model upside down Step 10: Fold flapses up on every side Step 11: Fold an outside corners along the center line Step 11: Repeat this step on every side Step 12: Open up figure Step 13: Fold left half on left diagonal line Step 13: And fold right half on right diagonal line Step 13: And squeeze the diagonal lines together Step 13: Repeat the same step on every side Step 14: Open up figure Step 15: Pull out the top point completely Step 16: Do the mountain fold along horizontal line Step 17: Valley fold corner flaps Step 17: And inside reverse fold for the sides of the center square Step 18: Open up the center flap Step 19: Use the same flap to valley fold it to the center Step 19: Then fold the whole figure along the horizontal line Step 20: Inside reverse fold on both sides Step 21: Inside reverse fold on front side of model Step 22: Fold down the tail Step 23: Fold the feet just like i did Step 24: Open out the front section Step 24: And fold the head toward back of body Step 25: Fold inside the face as marked on picture THANK YOU FOR WATCHING

60 thoughts on “Origami – How To Make An Origami Lion

  1. It would be a lot easier if you spoke through the steps because some things you do aren't very easy to understand because it's not in front of the camera…

  2. Got lost at 4:45 cause I can't see what you're doing. I finally got my bird base to invert, but I had the wrong triangles (the separated ones) up and couldn't get my solid pieces to pop up….

  3. I don't even know what to say man your really awesome πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘

  4. Thanks origami how to for such a nice lion. πŸ˜πŸ˜πŸ˜πŸ˜πŸ˜πŸ˜πŸ˜πŸ˜πŸ˜„πŸ˜„πŸ˜„πŸ˜„πŸ˜„πŸ˜‡πŸ˜‡πŸ˜‡πŸ˜‡πŸ™πŸ‘ŒπŸ‘ŒπŸ‘ŒπŸ‘πŸ‘πŸ‘

  5. This very easy to follow, again with your step by step folds in the left top corner. The more I fold, the more I realize that a lot of models have the same base. For example, giraffe and lion; or many birds(and not only) have the classic crane base. Looks like you're using a different paper as well, not the usual, do you choose a specific brand?

  6. Awesome ! For people who say he doesn’t give instructions,he does,he puts instructions if your cc is on

  7. You need to show the way you are folding it more clearly. Also when you are done with one step, it would be easier if you pause to show the result to the camera to let the viewers compare.

Leave a Reply

Your email address will not be published. Required fields are marked *