Making tools for sculpting with Clay | Homemade tools for clay | Tutorial

Making tools for sculpting with Clay | Homemade tools for clay | Tutorial


Hello, and welcome to Lazy minutes channel,
my name is Gintarė and today we will be talking about how to make tools sculpting tools at
home. You’ll need: Paper clip or small nail, thin wire, epoxy
resin, carcass of a pen, file or sand paper and some pliers. First you have to decide wich tool you are
going to make – loop tool or needle tool. For this tutorial purposes I will do both. Let’s start from the needle tool. Take the small nail and secure the end with
some thin wire. Press the wire as hard as you can so it wouldn’t
slide around. Put your newly done “tool” into the carcass
of the pen and add some very well mixed epoxy to seal everything in. I personally would suggest to leave the epoxy
to dry over night, as I did, but if you’re in a hurry, a few hours should be enough. Who dis gurl saving up your time since 2019
with the shortest tutorial. Press that like! If you’re on a really tight budget you can
actually do some tools without epoxy. While doing this tool I took old toothbrush
and cut off it’s head, then used paper clip to shape it to some sort of loop tool. I sticked the loop with simple super glue
and rolled it with duct tape. I also filed the edges of the paper clip,
just to make the shape a little prettier. It may be not the best quality, but honestly
it’s not that bad either. I hope this video was helpful and if you liked
consider subscribing. All of the links will be listed down below
as well as my Patreon. And see you in my next video about Special
effects makeup kit for beginners.

1 thought on “Making tools for sculpting with Clay | Homemade tools for clay | Tutorial

Leave a Reply

Your email address will not be published. Required fields are marked *