Use the abrasive paper to emery a surface. Paint the surface with white acrylic paint. Attach a masking tape. Apply a texture paste. Remove the masking tape. Apply a texture paste using a stencil to create rivets. Carefully tear the motif out of napkin. As a rule a napkin has 3 layers. Use the top one. Put the napkin on a regulare film (punched pocket). Pour water on the napkin. Carefully smooth the napkin out by fan brush. Lift the film together with the napkin to let water flow down. Carefully smooth the napkin out by fan brush. Put the film together with the napkin on the top of box. Carefully smooth the napkin. Carefully remove the film immediately. Apply glue immediately (Water down glue 1:1) and spread it from the center to napkin borders. After drying apply the acrylic varnish. Paint the top of the box (near the motive) with acrylic paints. Attach a masking tape. Paint other surfaces of the box with dark brown acrylic paint. After drying paint the surfaces with Chalk acrylic paint “Tortora”. Leave it to dry. Moisten a sponge in the water, wring it out, rub the surface by sponge and then rub down by dry fabric. After drying apply the acrylic varnish onto all surfaces of the box.. Attach a masking tape. Mix dark brown and beige paints with Rust Effect Powder and apply it onto the surface. Gently press the powder into the still slightly wet layer. To achieve different shades of rust drop the Rust Effect Reagents alternately on the surface. The Rust effect will appear in 3-5 hours. Apply the texture paste using the 3D stencil “Home sweet home”. After drying paint the relief with white acrylic paint or white patina. After drying apply a patina Dark Brown or Antique gold. Apply a patina Antique gold onto the rivets. . Fasten decorative locks and the decorative handle.