How to Make a Dolphin | Origami

How to Make a Dolphin | Origami

So these are the instructions for an origami
dolphin. The first step, we’re going to take a sheet
of paper. We’re going to start with the colored side
up and we’re going to make a book fold. So go ahead and take the bottom edge, fold
it all the way up to the top, and make sure that you have it nice and lined up, so that
there’s no extra color showing. Just get it to where it’s perfectly lined
up, and crease down at the bottom. Go ahead and open that back up. Then we’re going to the other book fold. We’re going to do the other direction as well. Again, try to be nice and precise, so when
you open it up, you’ll have a really nice plus sign right there. Flip it over. Now we do a diagonal fold, so take the bottom
corner, fold it all the way up to the top, just like this. Slide your finger down so it’s nice and flat,
and keep your other thumb down there to hold its place, slide out to one edge and then
slide out to the other. Open those two up and now take the bottom
and fold it all the way up to the top like that, again being as precise as we can. Now just go ahead and leave that flat. What we’re going to do is go ahead and pinch
right here at the bottom of this line, on either side, and we’re going to rotate our
hands close together, so that all of these will come together. We can make a nice triangle base. Let me show you that. This is called a water bomb base, so take
both of your fingers right here, right up against the edge, and we’re going to rotate
them up together and when they come together there, that’s going to help us make what’s
called a water bomb base. You have two edges on either side, we’re going
to flatten the paper down like that. Now that’s not using any new creases. That’s just using all of the creases that
are already there. We’re just changing the way that they’re folded
together, just like that. Now the next step we’re going to take one
flap and we’re going to fold it over, so now we’re going to have three flaps on one side. Three flaps on one side and one flap on the
left side. We’re going to now take this one flap, the
extra flap and we’re going to do a kite fold. We’re going to fold this edge, this leading
edge right there, it’s going to come down and it’s going to lie right on the middle
line, just like this, okay? Next go ahead and rotate it over. So now it’s facing the opposite direction. Next we’re going to take this top point of
the whole triangle, we’re going to bring it down to this spot right here. You can also think about it as taking this
edge, and bringing down to the bottom edge, and cutting the whole thing in half. So just like this, when we fold this down,
it’s going to thin the tail all the way down to a point like that. Next we’re going to fold up the dorsal fin. So this fold right here, this top of this
triangle that’s going to turn into our dorsal fin. So we’re going to fold it up enough so that
you could see it, if you were to flip it over, so you can still see that fin poke up right
there just like that. Next step we’re going to take this edge right
here, I’m going to fold it in half and that’s going to thin a little bit of the flipper. And if you want to have a nice pointed flipper,
you can leave it all the way down there. And you can also fold it down, just like this,
so that if you look at it, it just sort of thins it a little bit, but still keeps a nice
little flipper aspect to it, just like that. Next I’m going to take– you see how there’s
a skinny triangle right here at the top. What we’re going to do is we’re going to fold
that skinny triangle over. What happens when this triangle comes over
is it wants to bring all of this paper right here with it. That’s okay, we’re going to bring that over
too. So go ahead and when we fold this over all
of this is going to come with, and take note of what kind of a shape I’m making right here. I want to thin this down, not all the way
to a point, but enough to right here, this is the bump at the top of the head right like
that. Okay, so the next step for the origami dolphin,
we’re going to fold the front of the head, we’re going to fold it back like this and
then right back out again. That’s a pleat fold, and that’s so we get
a nice nose, sort of like a bottle nose dolphin, just like that. So it’s a pleat that goes back and forth. And the next to finish it off, we’re going
to fold the flukes of the tail. So go ahead and open this up. There are two sheets in here, two sections
of paper. Go ahead and open it up and inside reverse
fold one bottom section down. You can see how I open it up and push it down,
just like that. And then if you want, you can even open it
up and then fold this section up as well, in the middle as a crimped fold, so it would
come down and then back up. And that gets you that full tail section right
there, for the flukes on the dolphin and then when you flip it over and have a look and
that is the origami dolphin.

11 thoughts on “How to Make a Dolphin | Origami

  1. Peachy11060 or i should say bitchy11060 you dont care well shut up i care and some others pepol might care

Leave a Reply

Your email address will not be published. Required fields are marked *