How to Make a Ball | Origami

How to Make a Ball | Origami


This is a video for an origami ball, or as
it’s sometimes called a water bomb and that’s because it uses the origami water bomb base. The first step is we’re going to start with
the color side up and we’re going to make a book fold. It’s going to be with the white on the outside
when we fold it up, and make sure that you get all these edges to line up. So we don’t want to have it where there’s
extra color showing, get it where it’s nice and lined up, just white showing and then
slide your fingers across the bottom. That’s a book fold, and then open it up and
then do the other side for another book fold. Next open the paper up, flip it over, so the
white side is up and now we’re going to do diagonal folds. So take the bottom point, bring it up to the
top and again, make it as precise as you can. Get it right on there, slide your finger down
and then go out to the corners just like that. Open it up and then do the other diagonal
fold as well just like that. Now go ahead and leave that last diagonal
fold. What we’re going to do is put your fingers
right here on the– right underneath this line right here up near the top of it. And what we’re going to do is we’re going
to rotate our hands up and you see how what we’re going to create is a base is this triangle
base. It’s sort of, if you looked at it from the
top what it makes is a bit of a pyramid, a bit of a four-sided pyramid like that. And once you have that shape go ahead and
flatten it down, so that you have two flaps on each side, and this is the water bomb base
just like that. Next we’re going to take one flap. There are two flaps down here, so don’t take
both of them, just one of them.I’m going to take that corner and bring it all the way
up to the top just like that. Take this corner and bring it all the way
up here on this side as well, so the left and the right, and then flip it over and do
the same thing on the back, on the left side and the right side. Next we’re going to take this corner, right
here and we’re going to fold it straight over into the middle, so it goes from this side
directly into the middle line, and on the other side, we’re going to match it, so that
it comes right up in the middle there as well. And again we’re doing the left and the right
and then flip it over, and then do the same thing on the back, and these should match
up right along the same edge, as the ones you did on the front side like that. Now we’re going to fold– there should be
two little extra flaps right here. The points of the paper and we’re going to
fold both of those down, and fold them down right into that same center spot, so all these
flaps are coming in to reach together and they’re going to meet all in the exact same
spot, right in the middle. Flip it over and the same thing, and f you
don’t have those two little flaps they might be on the bottom for you, so in case you can’t
quite find them. There we go, so we’ve got all of that into
the middle. Now what we’re going to do is we’re going
to use this as a little triangle. There’s this little panel right here. So keep this, when this folds down keep that
nice and flat on the back. We’re going to put our finger right underneath
these two flaps, and you see these two little triangle panels? We’re going to fold them over the top of these
triangles. Go ahead and fold them all the way over, and
what we’re going to do is we’re going to take, we’re going to use this as a tab, this triangle
panel and we’re going to use this as a pocket. And we’re going to open this up a little bit,
you see there’s two flaps right in there. What’s going to happen is; and this takes
a little bit of maneuvering; we’re going to take this panel right here and we’re going
to take it and we’re going to put it right inside that pocket, and push it all the way
under there, so that locks it in real nice. It’s going to be all the way hidden inside. So open up this panel again, pop it open so
that you can find the two sheets in between them and we’re going to take that little triangle,
and we’re going to feed it inside there. Locks it in real well. And flip it over and I’m going to do the same
thing here. So go ahead and take this triangle, fold it
down over the top first, so that gives us the folds that we need to do this successfully. And then open this back up, push that triangle
inside and slide it under, so right here again, we’re going to open this up, feed that in
and that’s a really tight lock for each of those. It keeps it nice and flat. Now next step we’re going to take the top
point and fold it down, and the bottom point and fold it up, so that it makes a little
square, and those are just preliminary creases. Go ahead and open those back up, we’re going
to use those, but they don’t have to stay there. Now here comes the fun part. What we’re going to do is we’re going to open
this up to a plus sign. If you look at it from the top you can see
how I’ve got all four panels, as far away from each other as I can. And this is important, because we don’t want
to do it– you can’t pinch or hold these down. It won’t quite work as well. So open them up so that it makes a nice plus
and one side has some holes on it, the other side is sealed up. We’re going to use the side that has the holes
on it. And right there what we’re going to try and
do is we’re going to put air inside the ball, so go ahead and hold it up and blow into it,
and make sure you put air directly into it and it should pop up to make a nice little
origami ball. I’ll show you one more time, as that’s flattened
down just like that.

15 thoughts on “How to Make a Ball | Origami

Leave a Reply

Your email address will not be published. Required fields are marked *