DIY Wine Bottle Craft | Superman | Requested

DIY Wine Bottle Craft | Superman | Requested


Welcome back to DIY No Need To Cry with Ivelisse DIY Superman wine bottle craft. All the materials that I used for this DIY,
are listed in the description box below. This bottle was requested by Elizabeth. She wanted to make something special for her
daughter that had to do with the justice league. She said either Superman or Batman, well… I’m sorry to those batman lovers but I’m
a Superman fan myself as I grew up watching Superman with my father so Superman it was! I know I did the classic colors but you can
customize this any way you want. I just had to make the classic! Thanks for this fun request Elizabeth and
a happy belated 30th birthday to your daughter Jessica, a real hero, as she is a cancer survivor
and may God bless her with many more. Let’s get started! To begin, I painted a clean bottle with white
acrylic paint and a pouncer brush. I like to do this whenever I’m going to paint
a bottle because the white paint acts as a primer. The colors look better and take fewer coats
when you do this. While that dries, print out the logo at 50%
size. I found this one on Pinterest. I’ll leave the link in the description box
below. After printing it out, tape an index card,
stripes side down, over it using painters tape. We’re going to reprint it but this time
the image will be on the index card. I did the first image as a guide… to know
where to tape the index card too. I wanted the logo to stick out some, that’s
why I decided to print it onto the index card. You don’t have to do this if you don’t
want. You can just use the paper copy. Just remember that when you go to paint it,
it won’t be as sturdy as the index card so you’ll have to do all the painting once
it’s glued onto the bottle. Once it’s printed, gently remove the tape. Now you can cut the logo out. Using metallic red paint, I painted the S
in the logo and let that dry. I then painted the rest with a yellow I mixed
up and set that aside to dry. Using a sharpie I outlined the whole thing. Be gentle when doing this part. The harder you press the wider the line will
be. You want to use the tip of the marker only. Using a metallic blue and a pouncer brush,
I painted the whole bottle. Later on, you’ll see me change my mind and
add yellow to the rim so don’t paint it blue all the way up. I used the same metallic red I used for the
logo, on the cap. Now it’s time for my favorite part, adding
the glitter! These are the same glitter paints I showed
you guys in the other video and let me tell you… when you use the metallic paints and
these glitter paints together… you get an amazing shine! Remember that you can give them as many layers
of glitter as you want. You just have to let it dry before giving
it another one. I layered mine until I was satisfied. I’m obsessed with these paints now! Look at that combination! Now it’s the messy part. I cut up an old cotton shirt I no longer wanted
and used that to make the cape. I put some water in a bowl and added Mod Podge
to it. I didn’t measure, I just scooped some in
my hands and mixed it into the water. Saturate the piece of fabric with the water
and glue mixer. Then ring it out. I then added Mod Podge directly onto it and
rung out a little bit of it. So it won’t drip as I worked with it. Here I’m rolling one side to create the
top of the cape and from here on I was in my zone again, crafting away. I was just moving, adjusting and lifting the
cape to get it to look how I wanted it to. If a part wouldn’t stick… I would add Mod Podge to it, but remember
to smooth the mod podge out on the bottle or it’ll dry with a lump. You’ll see I used the logo to help me figure
out the spacing in the front of the cape. The trick is to create lifted areas, you don’t
want the fabric to lay flat. I kept adding Mod Podge to areas I thought
didn’t feel tacky enough or needed it to stay down. Be careful when doing this that you don’t
handle the bottle with your gluey hands… If you noticed, every time I turned the bottle
I was doing it from the very top. I had taken the cap off and handled it with
the glass rim that had no paint on it. Once it’s dry it should look like this. It’s very firm to the touch. Give the whole cape a coat of white acrylic
paint and let that dry. Be careful around the parts that meet the
bottle. It’s okay if you get paint on it, just try
your best not to. Now using the same metallic red as you did
for the cap and logo, paint the cape and let that dry. Again, being as careful as you can when painting
the edges that meet with the bottle. Once that’s all dry, take a small brush
and touch up any spots with the metallic blue. Give it as many coats as it needs, to cover
the spots you messed up on and let that dry. Be very careful, you don’t want to get the
blue onto the red. Make sure to work the paint out as you don’t
want it to dry with a lump. Now add the glitter paint back on as well. This is where I decided I wanted yellow on
the rim. As you see I went ahead and primed it with
the white paint. Now It was time to add the red glitter paint
to the cape and the cap. I know in the other video I said I didn’t
like the red but this was another glitter made by the same company and it worked way
better. Still not a huge fan of the red but much better. I added the yellow mix I used for the logo
onto the rim. Now to add the logo to the bottle. Place some Mod Podge on the bottle where you
want the logo, place the logo and go over it with more Mod Podge. Make sure to get those edges and that you
spread the glue around evenly, again you don’t want it to dry with lumps. Add the red glitter paint where the metallic
red is. Then add the yellow glitter. Don’t forget to add the yellow glitter to
the rim. Give it as many layers as you want, letting
dry between each one. Once all that is done, screw the cap back
on and you’re done. And here it is guys! All done! I wanted to keep this one simple and classic
but you know I had to add the sparkle to make it stand out. You can make any custom bottle the same way
using any character and colors you want. As I always say, the sky the limit. Be creative and try adding your own twist
to things if you want a different look. If you want to make a more simple bottle,
you can get a laser print out of the character and glue that on instead. Either way, have fun with it and be creative. I had so much fun making this one and it brought
back some wonderful childhood memories I had with my father. I make these so that you can recreate them
or get inspired by them. To give you ideas, so that you can apply them
to other projects. Have fun and as always guys if you liked my
DIY don’t forget to thumbs up the video as it helps my channel grow. The more my channel grows, the more supplies
I can buy and bring you new and better creations. Thanks for watching and if this is your first
time watching, I hope you consider subscribing to get updates on future video’s and remember,
do it yourself, there’s no need to cry!

58 thoughts on “DIY Wine Bottle Craft | Superman | Requested

  1. Nice job!!! Great idea and awesome bottle accomplished. Could you do an Nba team? Like OKC? I just know you would rock in whatever you do. Thanks for sharing

  2. Another great creation! If you were the instructor for DIY classes, I would be the first person to sign up! Awesome job!!! πŸ™‚

  3. Omg!!thank u!!!!!I'm crying and watching at the same time i love it.God bless u beautiful!!amazing!!speech lessπŸ€—πŸ˜πŸ€πŸ‘

  4. I would love to be a fly on your wall. Your creativity is so much fun to watch from start to finish. Superman would be proud lol…..I love the glitter paint……Lori…

  5. Really nice Ivelisse looks Bad Ass!!! Omg and the cape made it pop a lot love the glitter ✨✨✨ Looking at this one I got a lil inspired so here goes my idea for the Frida bottle use the bottle to make her face and make the unibrow and the flowers on her hair by sculpting them like ya did the silver jeweled bottle or use the bottle to dress it up with a long mexican skirt and the shirt put a necklace on and on the cap make her face im not trying to tell ya how to is just something it came to my mind watching ya now I'll have to drink some wine cause me wanna bottle lol……Love your Talent girl! πŸ’œ

  6. I love watching your videos. You are so original and so entertaining!❀️. I don't know if I will ever take on one of these projects but I still love them.

  7. Omg thank you soo much for doing this superman theme bottle. I'm huge superman fan. I am Jessica her daughter. Now I know what she's doing when she's not making us breakfast. She's watching your youtube channel πŸ˜…πŸ˜…πŸ˜…πŸ˜…πŸ˜…

  8. Girl, you ain't finished. Now you have to do Batman & Wonder Woman. Catwoman perhaps? πŸ˜„ πŸ˜πŸ˜„ 😁
    I am gonna have to do some of these with Arizona bottles.

  9. So cool Ivelisse! Your introduction is absolutely amazing, so epic and fun at the same time! Really inspirational and cool how your are using whatever you can find in the house such as an old T-shirt! πŸ™‚

  10. I love it, I just made one for my husband and he loves it, the only thing was, I didn't have a cap for it so I painted the cork lol, I didn't know what else to do lol, yours is nicer tho hahaha

  11. OlΓ‘ , sou do Brazil gostei muito do seu canal tenho um canal de artesanato e reciclagem mas o seu Γ© o melhor que jΓ‘ vi parabΓ©ns !

  12. Could you please please please do a Harry Potter theme please my daughter is in love with Harry Potter and I am trying to start my own business as well for my one year old in my two year old

  13. why am I getting bubbles in my paint with this sponge pouncer brush thing😣😣😣😣😣

  14. I don't know how many times I watch this video!!it's almost her birthday again and i cry all the time tears of joy!! My daughter is a God's miracle and yes she is cancer free!!!thank u Lord!! He is good!!thank i friend !!!!Siempre cree en Dios El te escucha sigue adelante no estas sola❀πŸ’ͺπŸ‘πŸ‘ŠπŸ’’πŸ”₯πŸ“–πŸ›πŸŽΆπŸ™‹

  15. Now this is so freaking cute! Awesome! Oh my gosh! This would be cute for a little boys birthday party favor with apple juice bottles. Girl… You did that, pat yourself on the back…lol

  16. I am starting to paint wine bottles and I wanted to know after sponging down Acrylic Paint with the Pouncer Brush and I wanted to know how long does the acrylic paint need to dry?

Leave a Reply

Your email address will not be published. Required fields are marked *