Colgante mixed media arcilla polimérica y alambre plano | ELEOJOTA00 | TUTORIAL

Colgante mixed media arcilla polimérica y alambre plano | ELEOJOTA00 | TUTORIAL


in today’s video we will learn to
make this clay pendant polymeric using mixed media techniques
and also combining clay with flat wire and resin the materials that we are going to need are
a sheet of white clay made the maximum thickness of the
flat wire laminator in this case It is about 34 millimeters wide
a template and cutting pliers tip pliers
round flat pliers preferably the flat that is coated as in this
case not to damage the wire With the help of our staff we will
make the shape of our pendant with white wire
cut a sufficiently long piece of wire
and with the help of round nose pliers to a spiral at one end
place the spiral matching the template and go shaping
with the fingers I have chosen this template in the form of
leaf or heart since it has no lines too complicated help yourself with flat pliers to go
creating the corners or vertices of the template and continues to shape taking as
reference the drawing it doesn’t need to be exactly
same as the template since you can go changing it to your liking in my case the final pendant is a bit
more rounded than in the template when you reach the end of the drawing, cut the
extreme and make another spiral with the help of
round nose pliers always check throughout the entire
process that the shape of the pendant match the template
now with the help of some wire fine close the template shape going around with the fine wire and placing with your fingers so that
the turns are tightly joined together finally cut the end with
cutting pliers and hide the tip in the back of the pendant press well on the table to
make sure it is flat Now let’s try the sheet of
white clay in this case i’m going to start
using alcohol inks as diluent uses some alcohol at
that you will add a drop of ink in this case I am using colors
green orange and blue the inks that I have used are of the
Pinata brand mix well with a stick all
colors spread a layer of alcohol on the
clay sheet and with the help of an eyedropper
go dropping the different ink colors with the help of a straw blows so that
the ink spreads and creates effects very interesting you can continue adding drops of
diluted or undiluted and blowing ink with the straw and you can also add more alcohol to
that is more diluted with a stick for the ears adds
alcohol points to get others interesting effects you can go playing with the tapes and the
alcohol until you like the effect that you’ve got once it is practically dry all the
ink you can apply gold leaf or bread silver as is my case in some points
where there is still some ink left a little damp
in this way the silver bread is adhere to these points and now if you let the ink dry
completely then you can apply paint
acrylic with the help of a template or extensive and with a sponge of those used
for makeup you can also add pizza to the cake that when rubbing with the blade
turns into a dust we can apply even with fingers apply it through the template to
create other interesting ways in my case the sheet was cracked
by alcohol inks in some places and when applying the inks to
cake highlighted the cracking of a way that was very pretty
you will see it in the final result of pendant and now it’s about giving free rein to
your imagination applying for example stamps with permanent black ink randomly all over the sheet
and here I am applying another stamp different
it’s about playing until we surprise the result we get once you like the sheet how it looks
finished add some scrap clay in
the back and smooth with a roller so that both layers stick together keep in mind that the thickness of both
layers must be the same or somewhat smaller than the flat wire thickness place the pendant wire shape
in the part of the sheet that you most like and press
can you help yourself with a block of methacrylate for better pressure without
hurt you we have to get the wire
cross all layers of clay and Finally
remove the leftover left around with the help of the blade removes all
the burrs left in the wire and equal to the surface of the part of
behind don’t worry if you don’t like the color
of the leftover chair that you have since this part will be covered with a
back of a color that you like once you have finished your pendant with
on a tile and we can bake in this case I have done others
accounts with the same sheet for make a necklace it’s time to bake
according to the manufacturer’s instructions of the clay brand that we are
using once our pendant is baked and
cold let’s apply a back pass through
the laminator a sheet of clay color you prefer to match the
front along with a sponge to create texture
apply liquid clay on the part rear of the pendant and extends the with
finger glue the textured clay sheet
from the back with care of leave the texture part out and with the help of the blade supporting the
against the wire cut the leftover help your fingers to cover
completely all the back of the pendant including the ends of
wire in this way we will create a species
sandwich so the wire doesn’t takeoff Review the texture again with the
sponge and now put it back on paper
of oven and recreate at the temperature that
indicate the manufacturer of the brand of clay that you are using
once your piece is baked and cold apply ultraviolet resin in this case
I am using the brand of delisha for war I put some resin in the center of the
Hang and spread out with the help of a toothpick towards the ends
very carefully to cover all the surface but preventing it from overflowing
by the ends add more receive add more resin if it is
necessary and extend again with the toothpick i once the entire surface is covered
place the pendant under a lamp ultraviolet light of these that are used
for the nails and in a few seconds it will be ready and this is how the pendant looks
finished has added a trim on the back to put the
cord that carries a closure also glued
I hope you liked this tutorial and encourage you to put it into practice
giving free rein to your creativity Then I leave the link to others
two videos from my channel that can interest you visit the blog www punto lj
puntocom for more information and tutorials
don’t forget to subscribe to the channel and activate the bell so you don’t get lost
None of my videos like and Share if you liked it and remember that
you can follow me on social networks thanks for watching this video and see you
in the next

1 thought on “Colgante mixed media arcilla polimérica y alambre plano | ELEOJOTA00 | TUTORIAL

Leave a Reply

Your email address will not be published. Required fields are marked *